This light source accurately reproduces ghosting and flare that occurs due to lens reflection.
The lens at the tip of the fiber cable is designed to appear the same size as the sun when the light source is photographed from a distance of one meter.
As such, the ghosting and flare that occur when photographing the sun can be reproduced extremely realistically.
It employs a xenon lamp to produce ample light, allowing ghosting and flare that previously only occurred with sunlight to be reproduced indoors.
In addition, as it offers a radiation wavelength range of an unbroken 350 to 800 nm, wavelength-dependent ghosting and flare can also be reliably reproduced.
or in any other situation where ghosting and flare evaluation, reproduction, or simulation is required.
| Products | Fiber Light Source for Camera Lens Ghosting Evaluation |
|---|---|
| Model | XL-500FV1 |
| Type | Desktop type |
| Input current | 1φ100v 50/60hz |
| Input Voltage range | AC100～120V/200-240V |
| Input power | Approx. 900VA |
| Lamp | 500W Xe lamp |
| Lamp model | SET-501F |
| Ave operation hours of lamp | 1500 hours (continuous use) |
| Illuminance instability | ±4％ less |
| Spectral distribution | 350～800nm ※UV and IR are cut |
| Color temperature | Approx. 5500K |
| Irradiance port size | φ10mm |
| Illuminance area | φ100mm |
| Illuminance distance | Approx.1150mm(From the illuminance port) |
| Output illuminance | 5000Lx More |
| Non-Uniformity of illuminance | ±10％ Less |
| Cooling type | Air cooling |
| Option | Light guide(With output lens, L=Approx. 2m） |
| Operation temperature | 0～30℃ |
| Operation humidity | 25～85％ |
